Shower Upgrade 101 - Best Practices For New Unit Installation

Book A Service

What're your opinions concerning How to Install a Shower Enclosure ?

An effective shower installation needs mindful planning as well as a great deal of work. For the most part, you will certainly need to do 3 types of tasks: mounting walls, installing the plumbing, and also finishing wall surfaces.

Preparation

Firstly, you should pick the type of shower that you want to install. It is very important to ascertain whether the selected shower can dealing with certain systems and can regulate a risk-free level of water with the central heating boiler. Most shower systems nowadays are created to be versatile to different water pressures (such as saved hot water as well as cool mains).
It is likewise vital to consider the water stress and the planning of the piping as well as water drainage for the shower

Different Kinds Of Shower Units

Push-on Mixer: The tube and spray parts of the push-on mixer shower system can be attached to the bathroom tap according to your need, and also the water temperature can be changed using the taps. Push-on mixers are cheap as well as extremely easy to set up. Nonetheless, although the tube connection is easy, it is quickly removed. In addition, it is bothersome to adjust the temperature.

Bath/Shower Mixer: The pipe and also spray of this sort of shower are combined with a bath mixer tap, as well as the temperature level can be changed via the bathroom faucets. It is a very low-cost choice as well as no additional plumbing is included. Nevertheless, the bath/shower mixers likewise deal with troublesome temperature control choices.

Handbook Mixer: The pipe and also spray of a hand-operated mixer shower device belong of the wall surface device and also the cold and hot water products are attached to a solitary shutoff The temperature level and also stress of the water are regulated via either one or a selection of handles (in a lot more pricey showers). Although temperature level control is a lot easier in hands-on mixer types, they are much more costly than the previously discussed mixers. They also call for added plumbing of cold and hot water system pipes.

Thermostatic Mixer: The tube and also spray of this shower kind belong of the wall system and the hot and cold water materials are linked to a single valve here also. It is full with an integrated stabiliser to self-adjust the water temperature and to prevent it from coming to be also warm. Among the greatest advantages of a thermostatic mixer shower type consists of hassle-free temperature level control. Nevertheless, it is the most pricey of the various mixer choices.

Power Shower: A power shower is a single unit having an effective electric pump that is capable of modifying both the water stress and temperature level. This sort of shower can be fitted if there is water system from a cold water cistern and also a warm water cylinder. A power shower makes the adjustment of both stress as well as temperature very easy. On the other hand, it disagrees for water heated straight by the shower or where the water is provided by a combination central heating boiler under keys pressure.

Electric Shower: An electric shower is plumbed into a keys cold water supply and it heats the water electrically. It is necessary to note that for this shower type to be mounted, the mains stress needs to be at least 0.7 kg/sq centimeters (10lb/sq in). The system permits the temperature level as well as pressure to be readjusted through a handle. Designs with temperature stabilisers are much better as they remain untouched by other faucets somewhere else in use within the family. A major downside of electric showers is that the control handle only permits the choice of high temperatures at much less pressure, or reduced temperatures at a higher stress. This is troublesome in the winter when the spray is commonly weak and also the mains water is cooler. However, this trouble is tackled in some versions which are available with a winter/summer setup.

Method

Depending upon the type of shower you wish to install, the shower head need to either be fitted in order to avoid its contact with the water in the bathroom below or the base tray, or it needs to have a check valve.
Before starting, it is a good idea to note the positions of the shower head and also control, and to prepare the pipe-work entailed. Furthermore, the water drainage system to remove the drainage will certainly need to be prepared. Both placements of the cable course and the shower button will additionally need to be taken into consideration if an instantaneous or electric shower system is being installed.
Utilize the guideline guide supplied with the shower unit to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is important to cut off the water system. In order to shield the pipes, they ought to be provided a water-proof covering as well as also fitted with isolating valves. The pipelines can after that be hidden right into the wall and glued over to neaten the general appearance.
Fit the base tray, shower head, and also fittings.
Connect the primary shower control to the pipelines that will certainly be providing the water (This might call for a female screw thread adapter).
Reconnect the supply of water as well as examination the pipelines for any kind of leakages, as some might need tightening.
If you are installing an electrical shower, bear in mind to switch off the electrical power supply prior to making any kind of electrical connections. When these links have actually been made (there need to be guidance within the instruction manual), the power supply can be changed back on.

Changing Water Stress to Match Your Shower

The cold water storage tank can be lifted to a greater height (often just 150mm (6inches)) by fitting a strong wooden assistance underneath it - perhaps made up of struts and blockboards. If you choose this option, the main as well as distribution pipelines will additionally have to be raised to meet the new height of the reservoir.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is picked, it needs to be linked into the power supply in order to operate.

Piping and Drainage

It is best to use 15mm size supply pipes, and make the runs to the shower as brief and also straight as feasible so as to maintain maximum stress and also reduce warm loss. Additionally, by minimising making use of joints for pipeline corners, you can decrease the resistance in the flow of the water. You can accomplish this by bending the pipes rather.

A Lot Of Typical Mistakes

Violating or overlooking neighborhood code restrictions.

Using pipelines that are also little.

Connecting copper to galvanized without utilizing a brass or dielectric fitting between both.

Not making use of tape or pipeline compound at threaded joints.

Not leveling your components when mounting them.

Not setting up an air space filling for fixtures.

Reducing supply stub outs as well short to install the shutoff valves onto after the finished wall surface remains in location.

Not properly straightening tubes into fittings or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will certainly trigger a leak.).

When transforming the water back on in your house, always run the outdoors pipe valve or flush your commodes to bleed dirt and also air from the lines. This particles can cause troubles in your sink taps and various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I have been very inquisitive about Simple ways to Install a Shower Cubicle on Your Own and I'm hoping you appreciated our post. Sharing is nice. You just don't know, you may just be doing someone a favor. We truly appreciate reading our article about How to Install a One-Piece Shower Unit.

Schedule Now!